Japan Original Imported SMC Cylinder

• Media: All
• Actuator: Electric
• Connection Form: Thread
• Type: Direct Acting
• Material: Cast Iron
• Pressure: Ordinary Pressure
• Model NO.: customized
• Valve Structure: Direct-Acting Piston Structure
• Power Supply: AC&DC
• Usage: Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: GB
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Product Name: SMC Cylinder
• MOQ: 1
• Color: Other
• Metarial: Metals
• Key Word: SMC Cylinder
• Shape: Customized
• Trade Mask: Weipeng
• Automation: Automatic
• Supply Type: OEM Service
• Shipping: Customized
• Frequent: 50/60Hz
• Transport Package: Box and Carton Package
• Trademark: Weipeng
• Origin: China
• HS Code: 8481804090

Product Description

 
Product Description
Cylinder is a cylindrical metal part that guides the piston in a linear reciprocating motion inside the cylinder. Air is converted from thermal energy to mechanical energy by expansion in the cylinder of an engine; gas is compressed by a piston in the cylinder of a compressor to increase the pressure.
The housings of turbines, rotary piston engines, etc. are often referred to as "cylinders". Cylinder application areas: printing (tension control), semiconductor (spot welder, chip grinding), automation control, robotics, etc.

kinds:
Pneumatic actuators convert the pressure energy of compressed gas into mechanical energy. Cylinder to do reciprocating linear motion and do reciprocating swing two types, as shown in Figure "cylinder". Do reciprocating linear motion of the cylinder can be divided into single-acting cylinder, double-acting cylinder, diaphragm cylinder and impact cylinder 4 kinds.
1.single-acting cylinder: only one end of the piston rod, from the piston side of the gas supply to generate air pressure, air pressure to push the piston to produce thrust out, return by spring or self-weight.
2.double-acting cylinder: alternating air supply from both sides of the piston, in one or two directions output force.

 

3. Diaphragm type cylinder: It replaces the piston with a diaphragm, outputs force in one direction only, and resets with a spring. It has good sealing performance but short stroke.
4. Impact cylinder: this is a new type of component. It converts the pressure energy of compressed gas into the kinetic energy of piston's high-speed (10-20 meters/second) movement to do work.
5. Rodless cylinder: there is no piston rod cylinder of the general term. There are two major types of cylinders: magnetic cylinders and cable cylinders.
Do reciprocating swing cylinder called swing cylinder, by the blade will be separated into two chambers, to the two chambers of the alternate air supply, the output shaft to do the swing motion, swing angle less than 280 °. In addition, there are rotary cylinders, gas-liquid damping cylinders and stepping cylinders.

Payment & Delivery

FAQ
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of applications.

Question 2: How can you tell if your solenoid is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out coil, you need to troubleshoot the valve solenoids.

Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, orifice size, temperature, pressure, voltage, response time and certification required for your application.