Pavement Mold DIY Garden Path Mould Concrete Plastic Molds (PL40-YL)
|FOB Price:||US $4 / Piece|
|Min. Order:||50 Pieces|
|Min. Order||FOB Price|
|50 Pieces||US $4/ Piece|
|Payment Terms:||L/C, T/T, Paypal|
- Model NO.: PL40-YL
- Surface Finish Process: Polishing
- Plastic Material: PP
- Application: Home Use
- Design Software: Pro-E
- Customized: Customized
- Specification: plastic
- Shaping Mode: Injection Mould
- Mould Cavity: Single Cavity
- Process Combination Type: Single-Process Mode
- Runner: Hot Runner
- Installation: Fixed
- Transport Package: Carton Box
- Origin: Fujian
1) 100% brand new and high quality
2) Mould color and sample item: as photos show
3) Mould size: 40*40*4cm
4) Material: plastic
5) Introduction: Garden path is built of stones or concrete for easy movement, as well as for decoration landscaping. A good garden paths will show the beauty of your garden. Concrete pave molds work well in all situations and create a very well garden stepping stones, and you can DIY the path,enjoy the design.
The Advantage of using the pavement mold:
1)Easy to use, just mix a concrete! Using this pavement molds anyone can do manually garden path at their house. No need to hire professionals person to do the work
2)This pavement molds can be reused many times and can save your cost
3)You can DIY your garden path, like add the color you like. Coloring gives molded concrete a more natural looking finish and is great for blending your path or walkway into your landscape design. Adding colorant to the concrete mix is the easiest method and produce consistent results.
4)This is the easy way to beautify your garden.
Following is the steps to use this pavement mold to build the pathways:
Step 1: Remove 1 inch of the top soil, and level the mold before filling with concrete. Removed top soil can be used to fill open spaces on sides after walk has set up.
Step 2: Add sufficient water for the amount of concrete being mixed. Mix thoroughly until plastic-like consistency is achieved. If additional water is required, add small amounts until the proper consistency is obtained.
Step 3: Use a shovel or trowel to fill each mold cavity to the surface of the mold. Pat and smooth the surface with trowel.
Step 4: Remove the mold promptly, and smooth the concrete edges with a trowel until the desired appearance is obtained.
Step 5: Place the mold adjacent to the completed section and continue this process until your project is completed.
About Size: Due to manual measurement, please allow slight error, make sure you do not mind before you enquiry/quote, please kindly understand, Thanks!
About shipping: We are offer worldwide shipping. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season
About our serve: If you are interested in our products or any further question, please kindly feel free to contact with us at any time.
Our goal is customer satisfaction!